Easun MPPT Solar Charger Controller 60A 80A 100A 12V/24V/36V/48V LCD Panel Regulator PV Input 190VDC Support Lithium batteries

 

MPPT 60A Solar Charge Controller Backlight LCD 12V 24V 36V 48V Solar Regulator Max PV 190VDC for Lead Acid Lithium Battery

 

The range of working voltage requirements for charging different batteries:

12V battery, PV voltage DC20V~DC150V;

24V battery, PV voltage DC37V~DC150V;

36V battery, PV voltage DC50V~DC150V;

48V battery, PV voltage DC72V~DC150V:

Features：

100% MPPT controller

Intelligent Maximum Power Point Tracking technology

Built-in DSP controller with high performance

Automatic battery voltage detection 12V/24V/36V/48V

Three-stage charging optimizes battery performance

Multi-function LCD displays

Reverse polarity protection of solar panel

Overcharge protection

Can be mounted easily

Suitable for battery types of sealed lead acid, vented Gel, and Lithium battery

you can Put two pieces 60A in parallel ,So total is MPPT 120A，Support unlimited parallel connection

Models

ICharger MPPT 6048

Charging mode

3-stage:constant current(MPPT),constant voltage,floating

System Voltage

12/24/36/48/Auto

Max PV Input Power

720W/12V; 1440W/24V; 2160W/36V; 2880W/48V

Max PV Input Voltage

190Voc

 

Battery voltage automatic recognition

12V system(DC8.7V-DC15.5V)；24V system(DC16V-DC31V)

36V system(DC33V-DC41V)；48 Vsystem(DC42V-DC64V)

Over charging protection voltage

12V system (16V)；24V system (32V)36V system(48V)；48V system(64V)

Limited current protection

61A

Max efficiency

≥98.1%

PV utilization

≥99%

AutoTemperature Compensation

-3mV/2V/ºC

Protection

Function

Temperature protection

75℃

Fan-on temperature

>45℃

Fan-off temperature

<40℃

Properties

Size (mm)

214x115x50

Netweight (Kg)

1.1

Grossweight (Kg)

1.2

Electro magnetic compatibility

Accord to EN61000,EN55022,EN55024

Enclosure

IP21

Environmental temperature

-20℃~+55℃

Storage temperature

-40℃~+75℃

Battery Parameters

Battery Type

System Volt

EQU

BST

FLD

BST_R

LRV

LDV

GEL

Auto

14.2V

14.2V

13.8V

13.2V

12.6V

12.0V

SEL

Auto

14.6V

14.4V

13.8V

13.2V

12.6V

12.0V

FLD

Auto

14.8V

14.6V

13.8V

13.2V

12.6V

12.0V

USE

Auto/12/24/36/48V

Definedbyusers

 

 

 

 

 

LI

12/24/36/48V

—

Defined byusers

—

—

Defined byusers

 

The maximum PV input power(The total power rated of PV can’t beover this watt thatwill break the

 controller.)

 

12V system(360W)

 

12V system(480W)

 

12V system(600W)

 

12V system(720W)

24V system(720W)

24V system(960W)

24V system(1200W)

24V system(1440W)

36V system(1080W)

36V system(1400W)

36V system(1800W)

36V system(2100W)

48V system(1440W)

48V system(1700W)

48V system(2200W)

48V system(2800W)

 

 

EASUN MPPT Solar Controller 80A 100A PV Input 150V 3 Stage Solar Charge Regulator For 12V 24V 36V 48V Lead Acid Lithium lifepo4 RJ485

 

Features:

80A MPPT solar charge controller· MPPT technology· 3-stage charging optimizes battery performance· Battery OVP、Battery LDV、Solar OVP、Overcharge、over-temperature、Reverse Polarity protection· Suitable for battery types such as sealed lead acid, vented gel and lithium battery, etc· Automatic battery voltage detection for 12V/24V/36V/48V· Easy to be mounted

 

 

Warning and Caution:

Be aware that only qualified professionals could install these controllers. Please read all manuals before installing them.1)Keep controller away from water. Dont use wet towel to wipe controller.2)Keep wiring correct, dont reverse wiring. Please pay attention to terminal wiring sequence.3)Keep controller in an environmental temperature from – 20℃~+55℃. Avoid direct sunlight.4)Keep good heat dissipation.5)Use the pure copper wires and connect all polarity correctly.6)Please don’t set any parameters if you are not professional since the controller can work fine in default condition except lithium battery.

Item

ICharger MPPT 8048

ICharger MPPT 10048

ChargingMode

3-stage:ConstantCurrent(MPPT),ConstantVoltage,Floating

SystemVoltage

12/24/36/48/Auto

MaxPVInputPower

1200W/12V;2400W/24V

3600W/36V;4800W/48V

1500W/12V;3000W/24V

4500W/36V;6000W/48V

MaxPVInput Voltage

150Voc

 

BatteryVoltageAutomaticRecognition

 

12VSystem(DC8.7V-DC15.5V),24VSystem(DC16V-DC31V)

36VSystem(DC33V-DC41V),48VSystem(DC42V-DC64V)

 

Overcharging ProtectionVoltage

 

12VSystem(16V),24VSystem(32V)36VSystem(48V),48VSystem(64V)

LimitedCurrent Protection

80A

100A

MaxEfficiency

≥98.1%

PVUtilization

≥99%

AutoTemperature

Compensation

-3mV/2V/ºC

ProtectionFunction

TemperatureProtection

80℃

Fan-onTemperature

>45℃

Fan-offTemperature

<40℃

Properties

Size(mm)

252*201*80.3

NetWeight(Kg)

2.28

2.49

Electromagnetic

Compatibility

AccordtoEN61000,EN55022,EN55024

Enclosure

IP21

EnvironmentalTemperature

-20℃~+55℃

StorageTemperature

-40℃~+75℃