Neck Stretcher Inflatable Air Neck Traction Apparatus Device Soft Neck Cervical Collar Pillow Pain Stress Pain Relief Tractor

Size:26x20cm

Features:
1. The surface is made of flocked fabric, which is comfortable to touch and has good breathability.
2. Velcro design, firm and durable, the retractor size can be adjusted according to the neck circumference.
3. Latex inflatable ball, wear-resistant, good elasticity, the size is suitable for the palm, easy to inflate.
4. Slide the blue roller on the inflation tube to deflate and store, easy to operate.
5. The air tube and the airbag are sealed together, with fine workmanship, good air tightness, no air leakage, and durability.
6. The front high and back low design conforms to the curvature of the human neck and fits comfortably during use.

How to use:
1. Wear the portable cervical retractor according to the correct method. The beginner can wear it according to the mirror, adjust the size of the neck circumference, and fix the front, upper and middle two Velcros, so as to be suitable for people with different neck circumferences.
2. Please tighten the air release nut before inflating the air ball.
3. Inflate with an inflatable ball until the patient feels the strength is appropriate and the symptoms are relieved.
4. Traction and fixation treatment should be performed at least 2-3 times a day for at least 30 minutes each time.
5. After use, loosen the air release nut and release air slowly.

Precautions:
1. Try to relax the neck as much as possible during treatment, and slowly add air pressure to enhance the traction effect.
2. When inflating, it should be done gradually and not too violently. When abnormal reactions such as dizziness occur during traction therapy, it should be slowly deflated until the undesired symptoms disappear, and then readjust and use.
3. Small traction should be done for 30 minutes before vigorous traction, and the reduction of traction should be carried out under the guidance of a doctor.
4. When using, avoid the airbag from contacting hard objects. When the surface of the retractor is stained, it can be cleaned with a soft brush and sticky water after inflation. Do not blister, rub hard or scrub.
5. Do not keep the product close to high temperature and heat.