Steam Cleaning Machine, Suitable for a Variety of Places of High Temperature Steam Cleaning Machine

Attributes:

Type: DF-A001

Rated voltage:220-240V AC

Power:1000w

Operating temperature: -20C to 50C

Weight: 1.4kg

Dimensions:25x13x22cm

Operating pressure: 300Kpa

Product material:PC + Aluminum alloy

Capacity: 301ml-500ml

User instructions:

1. Release the safety lid.

2. Fill appropriate water into the water tank. Please usethe provided measuring cup and the funnel.It isrecommended that you fill the tank to max. 2/3 full.Note: Never fill descaler, perfume or detergent into thewater tank, in order to avoid damages of the appliance.

3. Close the safety lid again.

4. Put the desired accessory (nozzle, hose, scrubbingbrush etc.) on the appliance: Set the accessory on theconnection and press it up to the rubber sealing. Turnthe accessory in the clockwise direction, until it locksinto the position.(Figure)

5.The brush and the curved nozzle:The bruch and the curved nozzle can be assembledon the housing, with the hose or the straight nozzle(Figure)6-square connection

Notice:

1.This appliance should not be used directly on softplastics, non pre-treated wood and cold glass.Caution! Steam could damage the furniture surface. For asafe work please execute a test run before. Pay attentionto the appropriate maitaining notes of the manufacturer.

2.Do not attach the appliance to the power supply until point7.

3. After the use press the steam button to reducethe internal pressure sufficiently. Then you can release thesafety lid.

4. Do not operate this appliance directly on coldglass.The window wiper must be attached to the scrubbingbruch. Assemble the scrubbing brush on the applianceor the hose at first. Take off the cloth from thescrubbing brush and connect the window wiper to thebrush by the two hinges (figure). The window wipercan be dismantled easily by loosening the hingesagain.

Maintenance:

This appliance requires with normal operation conditionsnot any special maintenance.Donot try to repair the appliance..Repairs of electricalappiiances must be carried out by qualified personnel.